|
|
|
All products: Total 85 Products | 21 - 40
 GFO Fiber Packing - P1105
GFO yam is made by special technique, it is different with traditional g PTEE yam, double layers of graphited e PTEE with graphite sandwich. It contains more graphite content with normal g PTEE yam, a...
 Glass Fiber Packing With PTFE Latex - P1309
Glass Fiber Packing With PTFE LatexSquare braided from E-glass fiber impregnated with PTFE, that largely solids from entering the seal and maintains its elasticity. It is suitable for pump and valves... Glass Fiber Packing, With Graphite - P1306
Glass Packing With GraphiteSquare braided from E-glass fiber impregnated with graphite. Normal for valves. It is fiberglass packing reinforced with SS or Nickel wire and lubricated by graphite.... Glassfiber Packing - P1308
Glass Fiber PackingIt is braided by texturized glass fiber yams. Used as heat-insulating materials and also an excellent substitute for asbestos packing.... Graphite Packing With Carbon Corner - P1203
Graphite Packing With Carbon CornerDiagonally braided from expanded graphite, reinforced at the corners throughout with carbon fiber. This corners and body make it three times more resistant to extr... Graphite Packing with Carbon Fiber Corner - P1405
This packing applies excellent imported high-modulus carbon fiber and graphit, Can prevent the leakage of gasl liguid, corresponds to the most rigorous escaping regulations of voc&VHAP, adds speci... Graphite Packing With PTFE Corner - P1403
P1403Graphite Packing With PTFE In CornersBraided from low-sulphur expanded graphite yarns reinforced with corrosion inhibitor, reinforced with lnconel wire. Each yam is round braided with lnconel mes... Graphite PTFE Packing With Oil - P1103
Graphited PTFE Packing With OilPacking made of 100% g PTEE yams, and re-impregnated with a silicone lubricant with density about 1.6/cm3. It is also economical g PTEE packing.... Graphite Seal Ring - HAGA-003
We supply mechanical seal and seal material，mechanical seal including pump seal, industrial pump seal, auto cooling pump seal, shaft seal, seal ring, carbide seal, etc.... Graphite Sheet With Wire Mesh - B1104
B1104-1 Graphite sheet with smooth metal foil; B1104-2 Graphite sheet with tanged metal; B1104-3 Graphite sheet with wire mesh. Made for various gaskets. Suitable for Petrochemical, Mining, Vessels, B... Graphite Tape - M1003
M1003 is a braided tube, made of expanded graphite yarn, formed into a strip/tape with rectangle and falt section.M1003B with a self-adhesive-film on one side. For easy fitting.M1003Z Reinforced by in... Graphited PTFE Packing - P1106
Braided from graphited PTFE (gPTFE)plain yam. The packing is soft, with low density. There are no free particles of graphite on surface and therefore no contamination can occur. Both are economical &q... Hydraulic Pump Seal - HG 101
Main Characteristics Mostly Use: major for suction pumps and ship pumps etc. Pressure in the sealed chamber: <= 0.8MpaTemperature in the sealed chamber: -20~100oCLinear Velocity: <= 5m... Industry Pump Seal - HG 155
Main Characteristics Mostly Use: water pumps and circulation pumps etc. Pressure in the sealed chamber: <= 0.8Mpa Temperature in the sealed chamber: -20oC~100oC Linear Velocity: <= 1... Kynol Fiber Packing - P1322
Kynolt Fiber Packing Braided from high-performance KynolTM(also named novoloid TM or phenolicTM ) fiber impregnated with special PTFE lubricant, it has very good mechanical properties combining softne... Mechanical Pump Seal - HG104
We supply mechanical seal and seal material，mechanical seal including pump seal, industrial pump seal, auto cooling pump seal, shaft seal, seal ring, carbide seal, etc.... Mechanical Pump Seal - HG60
Main Characteristics Mostly Use: major for suction pumps and agitator etc. Pressure in the sealed chamber: <= 0.5Mpa Temperature in the sealed chamber: -20oC~110oC Linear Velocity: <... Mechanical Pump Shaft Seal - HGM74
We supply mechanical seal and seal material，mechanical seal including pump seal, industrial pump seal, auto cooling pump seal, shaft seal, seal ring, carbide seal, etc.... Mechanical Seal for Auto Engine Pump - HGFB
Main Characteristics Mostly Use: internal-combustion engine cooling pump piping pump, oil and other low corrosion mediums. Pressure in the sealed chamber: <= 0.3Mpa Temperature in ... Mechanical Shaft Seal - HG104 HG110
Main Characteristics Mostly Use: average corrosion mediums, such as water, oil, weak acid,weak alkali, etc. Pressure in the sealed chamber: 104 Type: <= 1.0Mpa 110 Type: <=0.8~2.... |
|
|
Home 
Chinese
English
German
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian
By SupplierList.com
Home
Contact
Site Map